T4 spa pedicure chair – M1

Description

T4 spa pedicure chair – M1

• Contemporary bowl Made in the USA
• Bowl with ocean wave texture with 2 colors
• 2 LED lights add a glowing effect to the glass bowl
• Human Touch® HTxT4S
• 90° – 145° Power chair recline
• 7” Powerchair forward/backward
• 90° Rotating armrests
• Manicure trays
• Adjustable height and tilted footrest
• Removable Sink
• Embedded LED light
• Outside overflow design
• Liner™ Jet Technology
• Magna® Jet and liner
• ETL Approved
• Technical Bulletin 113 currently registered in 3 states Boston, California, and Oregon. In the end of 2014, salon with 9 or more chairs will need to comply with Technical Bulletin 113
• Armrest made of polypropylene, a naturally Acetone resistance material
• Stainless steel trays with cup holder
• USB port and purse holders
• Cordless built-in remote control with body map for full function massage
• Feather touch rollers, rotating horizontally
• Pad sets – leather (removable with Velcro)
• Sand colored trimming
• Face colors can be changed to espresso, cappuccino, or red
• To test for authenticity – rollers have Human Touch logo

Chair Specifications

• Operating Voltage: AC110-120V 60 Hz
• Power Consumption: 65 Watts
• Chair Size (upright): 32″L x 32″W x 43″H
• Chair Size (reclined): 49″L x 32″W x 36″H
• Product Weight: 93 Lbs.
• Maximum Load Weight: 285 Lbs.

Basin Specifications

• Hot and cold water supply lines required (hot and cold shut offs may be installed under or behind pedicure spa basin)
• Drain installation: Reference note on page 8; can be installed with optional drain pump for wall drain or a gravity drain.
• Capacity of basin: 4.5 U.S. Gallons (17.03L) = Traditional Whirlpool (with Jets) * Power source: 11OV AC I 15 Amp, 60 Hz (GFCI Protected)
• Caution: Pedicure spa must be installed by a licensed electrician and a licensed plumber, conforming to all local and national electrical codes.
• Jet System: Pipe free whirlpool pedicure spas: 1 jet, LED lights, optional drain pump. Jets: (may contain either)
• Luraco Jet Motors: 120V AC, 60Hz, 1A 0-29 Jet: 120V, 85WLED Lights: (may contain either)
• T4-L 18: input: 120V AC, 60Hz, 28VA Output: 12V, 60 Hz, 1.67A
• T4-L 18C: input: 120V AC, 60Hz, 28 VA, Output: 12V Ac 1.67A, 20V
• Electrical switches: On/Off air switch for Luraco Jet & Led Light. On/Off air switch for drain pump.
• Limited warranty: One (1) year from date of purchase.